Control Panel (Metro Models Only) - Sundance Spas Camden Owner's Manual

8.2 Control Panel (Metro Models Only)

A. LED Display: can display current
water temperature (default display),
water temperature set point, selected
filtering/heating mode, and error
messages.
B. Heat Indicator: lit when heater is on.
C. Warmer ( + ) Button: increases water
temperature set point.
D. Cooler ( - ) Button: decreases water temperature set point.
E. Jets 1 Button: turns jets pump #1 on and off. Press once for low
speed; press a second time for high speed; press a third time to turn
pump #1 off.
F. Light Button: turns underwater light on in random color mode or in
one of six solid colors. Refer to section 9.5 (page 24) for details.
Operation Details
• Temperature Adjustment: 65-104 °F (18-40 °C). Factory default set-
ting is 100 °F (38 °C).
• Underwater Light Operation: light runs for approximately 1 hour then
shuts off.
• Jets 1/Jets 2 Button Operation: jets run for 20 minutes after acti-
vated, then turn off automatically to conserve energy. Simply press
either jets button to continue operation for an additional 20 minutes.
A A B B C C D D
E E
F F
Page 21