Removing The Connectors; Removing The Fl Inverter Board - Toshiba Satellite P205D Maintenance Manual

4.26 FL Inverter Board
4.26 FL Inverter Board

Removing the FL Inverter Board

To remove the FL inverter board, first remove the battery pack, the display assembly, display
mask, and LCD module, then follow the steps below:
1. Remove the black M2x4 screw securing the FL inverter board to the top chassis.
Figure 4-79
2. Disconnect the two connectors on either side of the FL inverter board.
Satellite P200D/P205D Series Maintenance Manual
Removing the FL inverter board screws
Figure 4-80

Removing the connectors

[CONFIDENTIAL]
4 Replacement Procedures
4-65