Fan And Cpu - Toshiba Satellite P205D Maintenance Manual

4.24 Fan and CPU

4.24 Fan and CPU
Removing the Fan and CPU
To remove the fan, heat sink, and CPU, you must first remove the display assembly, keyboard,
top cover and system board, and then follow the steps below:
1. Turn the system board upside down. Remove the four M2.5x4 screws from the heat sink.
Follow the order indicated by the numbers on the heat sink in reverse to remove the
screws.
2. Lift and remove the heat sink from the system board.
Satellite P200D/P205D Series Maintenance Manual
Figure 4-70 Removing the heat sink screws
Figure 4-71 Removing the heat sink
[CONFIDENTIAL]
4 Replacement Procedures
4-59