4 Replacement Procedures
4.13 Wireless LAN Unit
Removing the Wireless LAN Unit
To remove wireless LAN unit, first remove the keyboard and the wireless LAN antennas as
described in the previous section. Then follow the steps below:
1.
Remove the two M2x2.5 screws securing the wireless LAN module. The LAN unit will
pop up.
Figure 4-38
2.
Grasp the wireless LAN unit and pull it out.
CAUTION: Do not touch the connectors on the wireless LAN unit or on the
computer. Debris on the connectors may cause malfunction.
4-36
Removing the wireless LAN unit screws
Figure 4-39
Removing the wireless LAN card
[CONFIDENTIAL]
4.13 Wireless LAN Unit
Satellite P200D/P205D Series Maintenance Manual