Crt Pcb - Toshiba Satellite P205D Maintenance Manual

4.21 VGA PCB

4.21 CRT PCB

Removing the CRT PCB
To remove the CRT PCB, first remove the battery pack, keyboard, display assembly, and top
cover, then follows the steps below:
1. Disconnect the CRT PCB wire cable (JP24) from the system board.
JP24
2. Remove the M2x6 screw securing the CRT PCB. Then remove the two hexagonal CRT
screws from the left side of the computer.
Figure 4-62
Satellite P200D/P205D Series Maintenance Manual
Figure 4-61 Removing the CRT PCB FFC cable
Removing the CRT PCB screw and the hexagonal screws
[CONFIDENTIAL]
4 Replacement Procedures
4-53