Toshiba Satellite P205D Maintenance Manual page 169

4.12 Function Button Board 4 Replacement Procedures
Installing the Function Button Board
To install the function button board, follow the steps below and refer to the figures in the
preceding section.
1. Set the function button board in place.
2. Secure the board with one M2.5x4 screw.
3. Turn the strip cover over and replace it on the top chassis.
4. Connect the other end of the FCC cable to the connector on the system board.
[CONFIDENTIAL]
Satellite P200D/P205D Series Maintenance Manual 4-35