Toshiba Satellite P205D Maintenance Manual page 184

4 Replacement Procedures
Installing the Subwoofer Unit and USB Board
To install the subwoofer unit and USB board, follow the steps below and refer to the figures
in the preceding section:
1. Place the USB board in position.
2. Connect the USB board cable (JP22) to the system board.
3. Secure the USB board with one M2.5x4 screw.
4. Seat the subwoofer unit in place.
5. Connect the subwoofer cable (JP52) to the system board.
6. Secure the subwoofer unit with four screws.
4-50
[CONFIDENTIAL]
Satellite P200D/P205D Series Maintenance Manual
4.19 Subwoofer Unit and USB Board