Adjusting The White Balance; (White Balance) - Sony MVC-CDZOO/CD300 Operating Instructions Manual

Adjusting the white
balsince (WHITE
BALANCE)
Mode dial: ~/S/A/M/SCN/Kll
Normally, the white balance is
automatically adjusted (AUTO). When
you record with the shooting condition
fixed or under the specific lighting
condition, you can manually adjust the
white balance.
f;FNmo;d&dial to 0, S, A,
, I
Press MENU.
The menu appears.
Select [WB] (WHITE BAL)
with 4/b, the desired setting
with UI.
ONE PUSH (L%)
Adjusting the white balance
depending on the light source
AUTO (No indicator)
Adjusts the white balance
automatically
IN DOOR (:&)
l
Places where the lighting
condition changes quickly
l
Under bright lighting such as
photography studios
l
Under so$um or mercury lamps
OUT DOOR (:+)
Recording a sunrise/sunset, night
scene, neon signs, or fireworks
To shoot in onempush white
balance mode
@ Select [ONE PUSH]. The r'r
indicator appears.
@ Shoot a white object such as paper
full under the same situation you
will shoot.
@ Press A.
The r'r indicator flashes quickly.
When the white balance has been
adjusted and stored in the memory,
the indicator stops flashing.
To reactivate auto adjustment
Select [AUTO] with &I in step 3.
Notes
l
Select [AUTO] when shooting with
fluorescent lighting.
l
The r'r indicator means:
Slow flashing: white balance is not set or
was not able to be set.
Quick flashing: white balance is being
adjusted (after you press A).
Lit steady: white balance has been set.
l
If the fi indicator keeps flashing even
when you press 4 record in automatic
white balance mode.