Table of Contents
Advertisement
l
An error occurs during recording by vibration.
+Possibly, you may be able to play back images if
you connect the camera to your computer with
the USB cable.
l
The CD-ROM drive does not correspond to the
packet-write system or does not conform to the
-+Consult the computer or the CD-ROM drive
manufacturer.
l
Causes not described above are occurred.
l
The image is protected.
-Turn
on the camera.
l
The battery pack is discharged.
AReplace it with a fully charged battery pack.
The image does not
l
The [VIDEO OUT] setting of your camera is
appear on the TV screen.
incorrect.
-Change the setting (page 85).
The SLIDE SHOW
l
The SLIDE SHOW function stops after about
function stops
20 minutes.
automatically.
--+To continue the slide show, select [START]
again (page 74).
The macro function does
l
[SCENE SELECTION] is set to [LANDSCAPE] in
not work.
the setup settings.
-Cancel
the SCENE SELECTION function
(page 58).
l
[CONVERSION LENS] is set to [ON] in the setup
I"
settings (MVCCD300 only).
+Set it to [OFF] (page 85).
Advertisement
Chapters
Table of Contents
