Sony MVC-CDZOO/CD300 Operating Instructions Manual page 38

q
Viewina imaaes with a comouter connected with the USB cable
Once you install DirectCD included in the supplied CD-ROM, you do not need to
finalize the disc to view images on the disc.
You can exchange data between the camera and a computer using the supplied USB
cable and CD-ROMs.
Installing the USB driver
1 Be not connect the camera to the computer yet.
I
Before connecting your camera to your computer, install the USB driver to the
computer. The USB driver is contained in the supplied CD-ROM (SPVD-006).
If the drive is not recognized, see "Troubleshooting" on page 93.
E.g., for Windows Me users
0 Turn on your computer and allow Windows to load.
Do not connect the USB cable in this step.
0 Insert the supplied CD-ROM (SPVD-006) in the CD-ROM drive of
your computer
If the setup screen of DirectCD appears, click [Finish] on the screen.
uter] on Windows and right-click the CD-ROM
CD-ROM (D:)), then select [Open (0)].
The file list of the CD-ROM appears. If other application software works, quit
the application software.
0 Double-click the [SONY USB] folder in the file list, and then double-
The installer of device driver starts and the necessary files are automatically
copied to the computer.
@ Restart the computer.
If the message appears after the installation to verify that you restart the
computer, restart the computer. In other cases, restart it manually.
0 Prepare the camera before connecting the computer.
l
Connect the AC power adaptor to the camera.
l
Turn on the camera.
38