Onboard Switch Setting Procedure - Toshiba RAV-SM566KRT-E Service Manual

10.8.5 Onboard Switch Setting Procedure

1. Detach the front panel.
2. Remove the drain guide and disconnect TCJ
sensor.
Drain guide
Drain guide
fixing screw
3. Remove the earth wire, TC sensor, and
motor lead (louver motor, fan motor).
TC-sensor
Earth wire
Display fixing screw
4. Remove the screws and detach the electrical
control box.
TCJ sensor
(with sleeve)
Fan motor connector
insert position
Electrical control box
fixing screw
– –
77
FILE NO. SVM-12004