Table of Contents
Advertisement
Quick Links
AIR CONDITIONER (SPLIT TYPE)
Installation Manual
Indoor Unit
Model name:
High Wall Type
RAV-SM566KRT-E
RAV-SM806KRT-E
For commercial use
Installation Manual
1
English
xx
Xxxxxxx
xxxxxxxxxxxxxxxxxxxxxxxx
Xxxxxxx
xx
xxxxxxxxxxxxxxxxxxxxxxxx
Xxxxxxx
xx
xxxxxxxxxxxxxxxxxxxxxxxx
Xxxxxxx
xx
xxxxxxxxxxxxxxxxxxxxxxxx
Xxxxxxx
xx
xxxxxxxxxxxxxxxxxxxxxxxx
xx
Xxxxxxx
xxxxxxxxxxxxxxxxxxxxxxxx
xx
Xxxxxxx
xxxxxxxxxxxxxxxxxxxxxxxx
xx
Xxxxxxx
xxxxxxxxxxxxxxxxxxxxxxxx
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Toshiba RAV-SM566KRT-E
Summary of Contents for Toshiba RAV-SM566KRT-E
-
Page 1: Installation Manual
AIR CONDITIONER (SPLIT TYPE) Installation Manual Indoor Unit Model name: High Wall Type For commercial use RAV-SM566KRT-E RAV-SM806KRT-E Installation Manual English Xxxxxxx xxxxxxxxxxxxxxxxxxxxxxxx Xxxxxxx xxxxxxxxxxxxxxxxxxxxxxxx Xxxxxxx xxxxxxxxxxxxxxxxxxxxxxxx Xxxxxxx xxxxxxxxxxxxxxxxxxxxxxxx Xxxxxxx xxxxxxxxxxxxxxxxxxxxxxxx Xxxxxxx xxxxxxxxxxxxxxxxxxxxxxxx Xxxxxxx xxxxxxxxxxxxxxxxxxxxxxxx Xxxxxxx xxxxxxxxxxxxxxxxxxxxxxxx... -
Page 2: Table Of Contents
Toshiba Carrier Corporation or, alternatively, he or she has been instructed in such matters by an individual or individuals who have been trained and is thus thoroughly 14 Troubleshooting . -
Page 3: Warning Indications On The Air Conditioner Unit
Warning indications on the air conditioner unit Definition of Protective Gear When the air conditioner is to be transported, installed, maintained, repaired or removed, wear protective gloves and ‘safety’ work clothing. Warning indication Description In addition to such normal protective gear, wear the protective gear described below when undertaking the special work detailed in the table below. -
Page 4: Precautions For Safety
– 3 – Precautions for safety Installation • Install the air conditioner securely in a location where the base can sustain the weight adequately. If the strength is not enough, the unit may fall down resulting in injury. The manufacturer shall not assume any liability for the damage caused by not observing the description of this •... -
Page 5: Accessory Parts
Accessory parts Explanations given to user • Upon completion of the installation work, tell the user where the circuit breaker is located. If the user does not know where the circuit breaker is, he or she will not be able to turn it off in the event that trouble has occurred in the air conditioner. -
Page 6: Selection Of Installation Place
– 5 – Selection of installation place Installation diagram of Indoor and outdoor units Avoid installing in the following places Select a location for the indoor unit where the cool or warm air will circulate evenly. Before installing the Avoid installation in the following kinds of locations. wireless remote Hook controller... -
Page 7: Installation
Cutting a hole and mounting installation Wireless remote controller plate • A place where there are no obstacles such as a curtain that may block the signal from the indoor unit. • Do not install the remote controller in a place exposed to direct sunlight or close to a heating source, such as a stove. -
Page 8: Piping And Drain Hose Installation
– 7 – Piping and drain hose installation How to remove the drains cap ▼ In case of right or left piping After scribing slits of the front panel with a knife or a Clip the drain cap by needle-nose pliers and pull out. marking-off pin, cut them with a pair of nippers or an equivalent tool. -
Page 9: Indoor Unit Fixing
Indoor unit fixing Drainage Refrigerant piping Gas side Heat insulator provided Pass the pipe through the hole in the wall, Run the drain hose sloped downwards. CAUTION and hook the indoor unit on the installation NOTE plate at the upper hooks. When the refrigerant pipe is long, provide support Indoor unit shield pipe Hole should be made at a slight downward slant on the... - Page 10 – 9 – Projection margin in flaring: B (unit: mm) Open the valve fully Wireless remote controller A- • Use the tightening torque levels as listed in the table below. Open the valve of the outdoor unit fully. A hexagonal B selection Outer dia.
-
Page 11: Electrical Connection
Electrical connection Wiring between indoor unit and outdoor unit Figure below shows the wiring connections between the indoor and outdoor units and between WARNING the indoor units and remote controller. The wires indicated by the broken lines or dot-and-dash lines are provided at the locally. •... -
Page 12: Wiring Connection
– 11 – Wiring connection Wiring connection (twin, ▼ When using optional wired remote controller Terminal block for The system interconnection wire and the wired remote Indoor / Outdoor (single system) triple, double twin system) connecting controller wire can be connected without removing the front panel. -
Page 13: Applicable Controls
Applicable Basic procedure for changing Each time button is pushed, indoor Terminal block for unit numbers in the control group change settings Indoor / Outdoor controls cyclically. Select the indoor unit to change connecting settings for. Change the settings while the air conditioner is not Terminal block for wired remote The fan of the selected unit runs. -
Page 14: Power Saving Mode
– 13 – Filter sign setting Power saving mode Remote controller switch Push button to return to the normal display. monitoring function According to the installation condition, the filter sign Indoor unit data term (notification of filter cleaning) can be changed. ◆... -
Page 15: Group Control
Group control Group control for system of multiple units One remote controller can control maximum 8 indoor units as a group. Simultaneous twin, triple or double twin system ▼ Group control in single system A combination with an outdoor unit allows simultaneous ON / OFF operation of the indoor units. The following system patterns are available. - Page 16 – 15 – [Procedure example] To recognize the position of the 3) Push button. If there is other indoor unit to be changed, In this time, the setup finishes when the repeat procedure to change the setup. corresponding indoor unit though the Manual address setup procedure display changes from flashing to lighting.
- Page 17 8 °C operation (SDI series4 Central control system ▼ Centrally control the system by the SDI, DI series on their own setting for the terminating resistor is required. and DI series4 only) • Use switch SW01 for the setting. Air conditioners at multiple locations can be controlled individually for each refrigeration system from a control •...
- Page 18 – 17 – ▼ Centrally control the system by connecting to the TCC-LINK central control system. How to set the SW01 Remove the screws and detach the electrical control box. Remove the front panel. Setting central control addresses • Before removing the front panel, direct the When air conditioners of the SDI, DI series are connected to the TCC-LINK central control system for central horizontal louver to the direction shown in the control using this product, set the addresses of indoor units using the following procedure.
- Page 19 Indoor unit line address manual setting / change Indoor unit line address manual setting / change [For 29 or less refrigeration systems (when they are used together with the SMMS series, the number [For 30 or more refrigeration systems (when they are used together with the SMMS series, the number of refrigeration systems of the SMMS series is included.)] of refrigeration systems of the SMMS series is included.)] Since all line addresses are set to “1”...
-
Page 20: Test Run
– 19 – Test run When a test run is not performed properly Before test run When a test run is not performed properly, refer to the Select the operation mode with error code and the part to be checked on button, [ Cool] or [ Heat]. -
Page 21: Maintenance
Maintenance CAUTION • Do not start the air conditioner while leaving air filter removed. • Push the filter reset button. ( indication will be turn off.) ◆ Daily maintenance Mount the air filter Turn on the circuit breaker, then push the Cleaning of air filter button on the remote controller to is displayed on the remote controller, maintain the... -
Page 22: Troubleshooting
– 21 – Troubleshooting Error codes and parts to be checked Wired Wireless remote controller remote Sensor block display of Confirmation and check Confirmation of error log controller receiving unit Parts to be checked / error display Judging Air conditioner Main defective parts device description... - Page 23 Wired Wired Wireless remote controller Wireless remote controller remote remote Sensor block display of Sensor block display of controller controller receiving unit receiving unit Parts to be checked / error Parts to be checked / error Judging Air conditioner Judging Air conditioner display display...
Need help?
Do you have a question about the RAV-SM566KRT-E and is the answer not in the manual?
Questions and answers