Bluetooth Reader Beep And Led Indications; Bluetooth Printer Setup - LXE MX8WM Reference Manual

Bluetooth Reader Beep and LED Indications

Bluetooth Reader Beep and LED Indications
Beep Type from Bluetooth Device
Acknowledge label
Label rejected
Transmission error
Link successful
Link unsuccessful
LED on Bluetooth Device
Yellow LED blinks at 2 Hz
Off
Yellow LED blinks at 50 Hz
Yellow LED blinks at the same rate as the paging beep (1
Hz)
Green LED blinks once a second
Upon startup, if the mobile Bluetooth device sounds a long tone, this means the device has not passed its automatic Selftest
and has entered isolation mode. If the device is reset, the sequence is repeated. Contact your
assistance.

Bluetooth Printer Setup

The Bluetooth managed device should be as close as possible, in direct line of sight, with the MX8WM during the pairing
process.
1. Open the LXEZ Pairing Panel (Start | Settings | System | Bluetooth).
2. Tap Discover. Locate the Bluetooth printer in the discovery panel.
3. Tap and hold the stylus (or doubletap) on the Bluetooth printer until the right-mouse-click menu appears.
4. Select Pair as Printer to pair the MX8WM with the Bluetooth managed printer.
The devices are paired. The Bluetooth managed printer may respond with a series of beeps or LED flashes.
Please refer to the Bluetooth managed printer manufacturer's User Guide; it may be available on the manufacturer's web site.
Contact your LXE representative
Note: If there is no beep or no LED flash from the Bluetooth managed printer, the MX8WM and the printer are currently
paired.
for Bluetooth product assistance.
E-EQ-MX8WMRG-C [ 87 ] MX8WM Reference Guide
Behavior
1 beep
2 beeps at low frequency
Beep will sound high-low-high-low
Beep will sound low-medium-high
Beep will sound high-low-high-low
Behavior
Linking in progress
Disconnected or unlinked
Bluetooth transmission in progress
Paging
Disabled indication
LXE representative for