Operator Panel - Digital Equipment MultiPrinter LA600 Service Manual

LA600 Field Service Manual
Digital Equipment Corporation
Part:
Part No: 5112 292 38150
REMOVAL
Disconnect mains cable
REASSEMBLING
Execute the Removal procedure in reverse sequence
Note:
Page 3-13 Page 3-14
LA600 Field Service Manual

Operator Panel

Remove all encasing parts (see Part: Housing)
⇒
Disconnect Operating Panel cable (A)
⇒
Loosen the screw (B) located at the bottom of the Operating
Panel
⇒
Remove the Operator Panel Assy
Remove the protection foil (C) from the Operator Panel installed
before mounting the housing
DEC P/N: FD-W00CU-01
Digital Equipment Corporation