Sybase Adaptive Server Anywhere Reference page 47

–gp command-line option
Function
Syntax
Applies to
Description
–gr command-line option
Function
Syntax
Applies to
Description
The default is 20 threads for the network database server, and 10 threads for
the personal database server. The number of threads cannot be greater than
the number of server connections, so the maximum number of threads for the
personal database server is also 10.
You may want adjust
-gn
Requests: Active and Requests: Unscheduled. If the number of active
requests is always less than
requests (active + unscheduled) is often larger than
to increase .
-gn
Set the maximum allowed database page size.
[ dbsrv7 | dbeng7 ] -gp [ 1024 | 2048 | 4096 ] ...
All operating systems and servers.
Database files with a page size larger than the page size of the server cannot
be loaded. This switch explicitly sets the page size of the server, in bytes.
If you do not use this switch, then the page size of the first database on the
command line is used.
The minimum page size on all UNIX platforms is 2048 bytes. You can still
use databases with smaller page sizes, but cache memory is used very
inefficiently. If you do not use this switch and start a server with no
databases loaded, the default value is 2048.
On all other platforms, if you do not use this switch and start a server with no
databases loaded, the default value is 1024.
Set the maximum length of time (in minutes) for recovery from system
failure.
[ dbsrv7 | dbeng7 ] -gm integer ...
All operating systems and servers.
When a database server is running with multiple databases, the recovery time
that is specified by the first database started is used unless overridden by this
switch.
$
For more information, see "RECOVERY_TIME option" on page 208.
Chapter 2 The Database Server
based on Performance Monitor readings for
, you can lower
-gn -gn
. If the number of total
, then you might want
-gn
29