4. Loosen captive screws labeled 2 and 3, and remove noncaptive screw labeled 1
closest to the front of the server (
5. Lift the media bay assembly out of the chassis (
FIGURE 4-10
6. (Optional) Disconnect and remove the ribbon cable from the PDB.
7. Set the media bay assembly aside on an antistatic mat.
8. Consider your next step:
If you removed the media bay assembly as part of another procedure, return to
■
that procedure.
Otherwise, continue to
■
page
4-10
Sun Netra X4250 Server Service Manual • May 2010
Loosening the Media Bay Assembly Screws and Lifting From Chassis
Section 4.3.2, "Installing the Media Bay Assembly" on
4-11.
).
FIGURE 4-10
FIGURE 4-10
).