Naming Tags - Akai S3000XL User Manual

LOAD
NOTE 1: In order to tag files, if you are using an MO hard disk or removable cartridge, the
write protect tab must be off as the tagging process requires writing to disk.
NOTE 2: Because CD-ROMs are a read-only medium, you cannot tag files on a CD-ROM.
To select a tag for loading, press the
Here we can see that the first set of files tagged BASS are in volume 2 and are those
shown with the
files in the BASS tag sequentially. As you do so, the volumes they are in will be shown at
the top right of the screen. When you come to the end of the tagged files, successive
pressing of the
back to the first files tagged. If you are happy with the selection, press
to load the sounds. You will receive the usual displays for loading. If the sounds you want
are not to be found in this tag, select another tag in the
press , you will be taken to the first file(s) in this tag.
You may select different types of tag loads. The default is
will load any tagged programs and the samples associated with them. Selecting
only samples that have been tagged.

NAMING TAGS

You may also name a tag simply by pressing NAME, typing in a suitable name followed
by ENT. It is worth giving your tags useful names to avoid confusion at a later date.
Page 226
alongside them. Pressing
key will cause the scrolling to 'wrap around' and you will be taken
will simply load any items in the current tag. Selecting
will only load the tagged programs and
key to display this screen:
allows you to scroll through the tagged
and/or
field. When you
and this
will load
S3000XL Operator's Manual