Akai S3000XL User Manual page 181

EQ
Pressing
EQ section of the two multi-effects channels is a four band EQ offering lowpass control
over a low frequency, two bandpass mid frequencies and a highpass high frequency
control. I.e.:
You may set the centre frequency and the gain for each of the four channels (on the two
mid frequency ranges, you may also set the width of the EQ effect).
The frequency of each of the four bands is variable and may overlap if you wish and you
may selectively boost these frequencies if you wish to enhance certain aspects of the
sound. Furthermore, you can modulate the frequencies of either of the two mid range
sections to create auto-wah effects such as you find on a wah-wah pedal. It is also
possible to create synthesiser filter sweep effects.
The EQ screen looks something like this:
The parameters are:
S3000XL Operator's Manual
in any of the effects pages will give you access to the EQ functions. The
LP
BP1
BP2
HP
G
A
I
N
LOW
This sets the centre frequency for the four bands of EQ, LOW, MID1,
MID2 and HIGH. For Khz frequencies, the field is expressed as n k n Hz. For
example, a setting of 6k3Hz represents a setting of 6.3kHz. You will note
that the values for these fields cannot be set using the numeric keypad.
Only the DATA control may be used.
GAIN
GAIN
GAIN
GAIN
FREQUENCY
BP1 BP2 HI
EFFECTS EDIT
Page 175