EFFECTS EDIT
STEREO DELAY/ECHO EFFECTS
If you select STEREO in the MODE page, the screen display will show something like this:
Here you may set the delay time, the high frequency damping and feedback level for the
left and right delay channels. All parameters are identical to those explained in the MONO
ECHO effects except, of course, that you have two separate channels of them. You may
set completely different values in both channels to create some wild echo and delay
effects.
NOTE: The maximum delay times for each of the two delay lines is half that of the MONO
delay times we have seen so far.
S3000XL Operator's Manual
Page 191