Table of Contents
Advertisement
9.
Each source for the MIX4 can be selected by a pull down box that opens, if one clicks the triangle soft
button in the far left column :
9.1
One can scroll through that list. The selection is made by clicking on a list entry.
9.2
The list entries are organized in two categories.
Stereo sources - different source coding for the left and right channel
Mono sources - same source coding for the left and the right channel
9.3
If you have filled in all groups of sources you need for that particular MIX4 you must configure the
inputs where the tie line(s) from the DHD frame are connected to.
9.4
Pls. go to Sources and make the appropriate settings. If already done don't forget to send the Setup
"to Device" (Hardware page).
page
49
Jünger Audio-Studiotechnik GmbH
Advertisement
Table of Contents
