Table of Contents
Advertisement
Jünger Audio-Studiotechnik GmbH
Set up the MIX4 to remote control DHD – RM 4200 router functions
The procedure to prepare a MIX4 for DHD router remote control is quite simple. Pls. ensure that the MIX4
and the PC, where the Setup software is executed, are connected to the LAN where the DHD router and the
PC that holds the CSV type configuration file reside. Make sure that the MIX4 and it's Setup computer have
serial connection.
1.
First you must go to the Hardware page and perform a "from Device" to load the current settings into
the Setup software.
2.
You must assign a unique IP number from that LAN to the MIX4 (pls. contact the system
administrator).
3
Next enter the sub net mask from that LAN
4.
The "Name:" field is optional and can be left blank for DHD login.
5.
On the Router page you must enter the IP number of the DHD Device.
page
46
Advertisement
Table of Contents
