Operator/Security Setup - junger MIX4 Operation Manual

For those who do not want to work wit multiple operators may: Disable Operator Management at all.
Each of 10 Operators can have his/her own, individual settings.
The Operator list box is editable, so you can enter a name for each Operator : Morgan in this case.
Each operator can have a 4 digit PIN: assigned (default 0-0-0-0).
The name of the currently selected Operator will appear in the display of the MIX4.
If no PIN is assigned there will be immediate log in for such an operator.
Certain functions of the MIX4 can be locked out, preventing their use or operation. These are selected for a
given operator using the :
Lock Function pane
A special function is the initialization of the MIX4. When updating the firmware we recommend to
initialize the unit to prevent malfunctions if one selects an NV memory area that is not initialized and
may contain wrong data, which may have a different meaning to the newer firmware.
Press Setup button #1 <USER> and #6 <no label>. It will take about 5s.
This should only be allowed for experienced operators or the administrator.
Lock Desktop-Unit pane
Setup buttons can be locked individually as well as User Buttons and/or Bus Buttons.
Select Channel for Preset Shortcuts pane
You can predefine a Channel Strip where to load a preset by means of a Preset short cut.
Press <DSP> and one of the <USERx> or <BUSx> buttons.
Button Behavior pane
One may now decide about the behavior of the MIX4 buttons :
The selection is between :
toggle
push
both

Operator/Security Setup

pressing the button once will turn the function on
Pressing the button a second time will turn the function off
The function is activated as long as the button is depressed
the buttons operate in both modes where pushing the button longer
than a second will force it to perform the push function
page 35
Jünger Audio-Studiotechnik GmbH