Table of Contents
Advertisement
5.1
If the application port number is different from 2008 that number will appear
below the IP number. You must correct it to 2008 for proper operation.
6.
Send the Setup "to Device".
7.
Press the "Configuration" soft button on the Router page. This will open a file dialog :
From here one must choose the CSV (comma separated) file that contains the actual Device
configuration. Such file you must export by the DHD "Toolbox". There you must open the
File menu and select "Export DSP Frame I/O as CSV ....".
page
47
Jünger Audio-Studiotechnik GmbH
Advertisement
Table of Contents
