Removing The Front Wheel - APRILIA SR 50 Workshop Manual

CYCLE PARTS
5.3.2.

REMOVING THE FRONT WHEEL

WARNING
When removing/refitting, pay utmost attention
not to damage the brake line, disc and pads.
•
Position the vehicle on the center stand.
•
Set a support under the frame.
•
Remove the brake caliper, see (CHANGING THE
FRONT AND REAR BRAKE PADS).
•
Loosen and remove the wheel shaft nut.
•
Loosen the shaft screws.
•
Loosen and remove the wheel shaft.
•
Collect the odometer drive fitting.
•
Slide out the wheel.
WARNING
Do not operate the front brake lever when the
wheel is not in place or the caliper piston might
come off its housing, thus causing brake fluid
leakage.
5 - 22
SR 50