SR 50
4.2.
ENGINE IE 50
4.2.1.
REMOVING THE ENGINE IE 50
•
To remove the crankcase, first remove the lower
shield, the battery, the fuel tank, the throttle body,
keep it connected to the throttle cable and drain the
cooling system.
•
Using a belt and an A-frame, lift the vehicle rear end.
•
Loosen and remove the shock absorber upper screw.
•
Loosen and remove the two cable guide screws.
•
Loosen and remove the two screws.
•
Slide out the rear brake caliper, keep it connected to
the fluid line.
ENGINE
4- 13