PERIODIC MAINTENANCE
2.2.6.
MIXER OIL IE361 – C364
TOPPING UP
CAUTION The vehicle fits a separate mixer that mixes fuel
and oil, necessary for lubrication.
•
Remove the front cover, see (REMOVING THE
FRONT COVER).
•
Remove the plug.
•
Fill with oil, see (LUBRICANT CHART).
•
Refit the plug.
AIR BLEED
WARNING
If the oil in the mixer oil reservoir is low or if the
mixer oil line - from the mixer to the reed
assembly - is removed, it is necessary to bleed
the system. This must be done to avoid damage
caused by the engine running with air in the
mixer oil system.
•
Remove the lower cover, see (REMOVING THE
LOWER COVER).
•
Remove the rubber plug.
•
Using a screwdriver, loosen the screw inside the mixer.
•
Oil is drained by gravity; allow for the oil to flow out
without air bubbles.
•
Tighten the screw.
•
Refit the cover.
2 - 30
SR 50