Install downdraft vent filter
Finalize
• Place filter into the opening and on top of
Installation
• Place grille over the filter.
Electric Components:
Push in and turn each knob to high position.
Make sure each element heats up.
Gas Components:
(Electrical connections should be complete).
• Plug power cord into outlet.
• Assemble burner(s) as shown.
• Check for proper ignition:
• First test may require some time, while air is
the supports.
– Push in control knob and turn 90° to HIGH
position.
flushed out of the gas line.
– Turn knob to OFF.
– Repeat the procedure for each burner.
Installation
Component Cooktop System
Control Knob
CAUTION
the burners until all burner parts
are in place.
Filter
Grille Removed
Burner
Grate
Burner Cap
Trim Ring
Do not operate
19
Need help?
Do you have a question about the Monogram ZEW145 and is the answer not in the manual?