Step 4: Secure Cooktop(S) To Countertop - GE Monogram ZEW145 Installation Instructions Manual

Monogram component cooktop system
Hide thumbs Also See for Monogram ZEW145:
Table of Contents

Advertisement

Joining
Multiple
Cooktops
(Continued)
Joining additional cooktop to downdraft vent
or to downdraft grill
• Remove endcap on the side of the next
• Pre-tap holes in downdraft joiner and
• Attach downdraft joiner strip to cooktop.
4
• Loosen screws on hold-down brackets at
Step
• Drive a long screw (2 lengths are provided)
Secure
Cooktop(s)
to Countertop
16
cooktop to be joined.
endcaps by driving supplied screws through
holes and then backing out before
installation. This will make the joining
process easier.
each end of cooktop. Extend the bracket to
reach the underside of the countertop.
Tighten screws.
through the bracket until screw is tight
against the bottom of the countertop.
Installation
Component Cooktop System
Front of Countertop
• Place cooktop next to downdraft vent in the
cutout.
• Drive two phillips head screws into pre-
tapped holes. Use a phillips screwdriver bit
socket.
• To install additional vent or cooktop(s),
refer to "Joining Multiple Cooktops."
Front of Countertop

Advertisement

Table of Contents
loading

Table of Contents