Introduction; Section 2, Design, Description And Specifications; Figure 2-1 Gd-2250T Pump - Gardner Denver GD-2250T Operating And Service Manual

SECTION 2
DESIGN, DESCRIPTION AND SPECIFICATIONS

INTRODUCTION

The Gardner Denver GD-2250T is a multi-
purpose pump for various applications such
as oil well servicing,
industrial use, etc. The pump was designed
using modern analytical
methods and techniques for stress analysis
of structural components, gears, and journal
bearings. The gear drive was calculated in
accordance with the most recent standards,
procedures and computer
developed by American Gear Manufactures
Association.
The Issue of personnel safety is the most
important topic covered in this manual.
Note: The above figure shows a GD-2250T pump assembly with a 5.5" Fluid End
water blasting,
engineering
software
FIGURE 2-1: GD-2250T PUMP
301THD996
Therefore, in the beginning of this manual
the user is introduced to dangers inherent in
the operation of a high pressure pump. To
avoid accidents and injuries, all safety rules
listed in this section and also all other
applicable safety rules and regulations must
be carefully observed.
The sections on Pump Design, Description,
and Specifications, describe the pump
design, list the pump specifications, and
present drawings depicting
external views and all essential cross-
sectional drawings.
Page 11
the pump