Table of Contents
Advertisement
6. From the Bits Per Second drop down list box, choose 38400.
7. From the Data Bits drop down list box, choose 8.
8. From the Parity drop down list box, choose None.
9. From the Stop bits drop down list box, choose 1.
10.From the Flow control drop down list box, choose None.
11. Press the Tenor AX power switch to On. After the bootup sequence, the login prompt will appear.
12.Enter a login name. The default login name is admin.
13.Enter a password. The default password is admin. (Once you are up and running,
changing the password is a good idea for security purposes). Step through each of the
following parameters and enter the correct values for your installation: IP address, Sub-
net Mask and Default Gateway.
14.At the Quintum prompt, type ei to reach the Ethernet prompt and then type config to change to
the Configuration mode.
15.To set the IP address, type set ipa followed by the IP address.
16.To set the Subnet Mask, type set subnetmask, followed by the subnet mask.
17.Type siprd to change to the Static IP Route Directory.
18.To set the Default Gateway IP, type change 1 g followed by the IP address for the default gate-
way IP.
19.Type submit.
P/N 480-0062-00-14
VoIPon www.voipon.co.uk sales@voipon.co.uk Tel: +44 (0)1245 808195 Fax: +44 (0)1245 808299
Chapter 3: Installation/Basic Troubleshooting
Figure 3-9 Port Settings Window
3-14
Hide quick links:
Advertisement
Table of Contents
