Table of Contents
Advertisement
Chapter 3: Installation/Basic Troubleshooting
Connect to Ethernet LAN
You can use these instructions for general connection purposes only. The Ethernet hub/switch manu-
facturer's documentation should provide specific instructions for connection to another device, such
as the Tenor AX.
Figure 3-6 Connect to Ethernet Hub/Switch
RJ-45 Cable
Data
Network
Ethernet Hub/Switch
1. Plug one end RJ-45 Ethernet cable into the port labeled LAN.
2. Plug the other end of the cable into one of the Ethernet hub/switch ports. If a custom cable or
adapter is required, see
Chapter 2: Hardware Components
for Ethernet RJ-45 10/100.
P/N 480-0062-00-14
3-9
VoIPon www.voipon.co.uk sales@voipon.co.uk Tel: +44 (0)1245 808195 Fax: +44 (0)1245 808299
Hide quick links:
Advertisement
Table of Contents
