Dynamic Call Routing - Quintum Tenor AX Product Manual

Chapter 1: Overview

Dynamic Call Routing

Tenor AX's intelligent call routing capabilities are state-of-the-art. The unit automatically detects
and supports three call types: voice, fax, and modem.
Tenor AX will first identify the call origination site—Line/FXO, Phone/FXS, or IP routing group —
and then route the call according to the parameters you have configured in the routing database.
Each call may be routed via circuit switched path between any two circuit groups, or compressed
and transported via VoIP when connecting to an IP routing group. Trunk circuits are those that typi-
cally connect to another circuit switched network such as the PSTN. Line circuits typically connect
to a termination device on the user premises, such as a PBX.
P/N 480-0062-00-14 1-7
VoIPon www.voipon.co.uk sales@voipon.co.uk Tel: +44 (0)1245 808195 Fax: +44 (0)1245 808299