Quintum Tenor AX Product Manual page 38

Chapter 3: Installation/Basic Troubleshooting
Attach the unit to the wall as follows:
1. Determine the wall area to mount the unit. With chalk or a soft pencil, mark the install area
according to Figure
NOTE: Ensure the unit is level.
2. Position and attach one mounting bracket to the unit using a screw existing in the system and one
screw included with the package. See
3. Position and attach the other mounting bracket using a screw existing in the system and the
remaining screw in the package. See
Mounting
Fan
Unit Front
4. Mount the unit to the wall using the four remaining screws included with the system.
5. Ensure the unit is firmly mounted against the wall.
3-4
VoIPon www.voipon.co.uk sales@voipon.co.uk Tel: +44 (0)1245 808195 Fax: +44 (0)1245 808299
3-1.
Figure 3-1 Wall Mounting Dimensions
7 3/4" (19.9cm)
Figure
Figure
Figure 3-2 Wall Mount Installation
Brackets
Note: Ensure unit is level.
Note:
The fan needs to be pointed up (when viewed from
the front of the unit, the fan is on the left)
3/16"
3-2.
3-2.
Attach each bracket to the
unit using 1 screw already installed
in the unit (unscrew and re-insert)
and 1 screw included
with the package.
P/N 480-0062-00-14