Table of Contents
Advertisement
TROUBLESHOOTING GUIDE
Symptom
Possible Problem
AC Adaptor is not plugged into a
wall outlet or the output connector
The unit does
is not plugged into the Power in
not respond (no power)
jack on the back of the unit.
Wall outlet is not functioning.
Using no/wrong iPod Adaptor.
iPod does not
iPod does not install properly.
dock properly
iPod is not installed properly.
iPod does not respond
to the speaker system
Your iPod is locked up.
iPod mode is not selected.
iPod is not installed properly.
iPod does not
charge up
iPod is locked up/ frozen.
iPod battery has problem.
Volume level is set too high.
Sound is distorted
Sound source is distorted.
Unit gets warm after
This is normal.
extended play at
high volume
13
Power Requirement
Solution
Main unit
AC input :
Plug the AC adaptor into a wall
outlet and plug the output connector
Remote Control
into the Power in jack on the unit.
Frequency
Plug another device into the same
outlet to confirm the outlet is working.
Total Power Output
Make sure the dock insert is the
proper fit for your iPod.
Remove your iPod from the dock
and check for obstruction on the
connectors in the dock and on your
iPod. Then reseat it in the dock.
Remove your iPod from the dock
and check for obstruction on the
connectors in the dock and on your
iPod. Then reseat it on the dock.
Please refer to the instructions on the enclosed warranty card for returning your unit for service. When
Please make sure that your iPod is
returning the unit, please remove batteries to prevent damage to the unit in transit and/or from possible
working properly before docking into
leakage. We are not responsible for batteries returned with the product or for the cost of replacement.
the unit. Please refer to your iPod
manual for info on resetting the iPod.
Slide the Audio Input Selection
Distributed by:
switch at the back of the docking
SPECTRA Merchandising International, Inc.
station unit to iPod position.
Chicago Industry Tech Park
4230 North Normandy Avenue
Remove your iPod from the dock
Chicago, IL 60634, U.S.A.
and check for obstruction on the
connectors in the dock and on your
Please have model number ready, for Customer Service, call 1-800-777-5331.
iPod. Then reseat it in the dock.
Please make sure your iPod is
*The specification and external appearance of the set are subject to change without prior notice.*
working properly before docking into
the unit. Please refer to your iPod
manual for details on resetting.
Decrease the volume.
If the iPod original sound source is of
poor quality, distortion and noise are
easily noticed with high-power
speakers. Try a different audio source
such as a music CD.
If you are using an external sound
source like older generation of iPod,
try reducing the output volume on the
device itself. Also try turning bass
boost OFF or change the EQ setting.
Turn the unit off for a period of time or
lower volume.
SPECIFICATIONS
AC 15V, 2400 mA
2 x DC1.5V "AAA" (UM-4) Batteries
Response
100 - 16000Hz
25W rms
SERVICE
14
Printed in China
Advertisement
Table of Contents
