Step Saver (Acc-0020) - Better Outdoor Products Quick Series Operator's Manual

Step Saver (ACC-0020)

1. Using a 9/16 wrench, install hitch plates to
existing bolts Figure L.
2. Using a 7/16 wrench, install the support bracket
to the handlebar with U-bolts. Align the top of
the bracket with the bottom edge of dash panel
Figure M.
3. Insert the kingpin of the trailer arm into the
bearings on the rider platform.
4. Secure with snap ring Figure N.
Figure L
Figure M
BetterOutdoorProducts.com
44
5. Attach Step Saver™ using the clevis pins and
hairpin cotters Figure O.
6. Secure the Step Saver™ in the folded position
using lynch pin Figure P.
Figure N
Figure O
Figure P