Forward Cable (10425); Forward Control Lever (10422) - Better Outdoor Products Quick Series Operator's Manual

Forward Cable (10425)

1. Remove reverse lever.
2. Remove clevis pin (10423) Figure 42.
3. Remove dowel pin (10524) from forward control
lever (10422) Figure 43.
4. With a pair of pliers, collapse both tabs and pull
cable from perch (10420) Figure 44.
5. Cut cable tie located near cable adjusters.
Figure 42
Figure 43
Figure 44
BetterOutdoorProducts.com
29
6. Remove hairpin cotter and washer Figure 45.
7. With a pair of pliers, collapse both tabs and
carefully remove cable Figure 46.
8. Install new cable in reverse order, making sure
to seat both rubber boots on each end of cable.
Note: When inserting clevis pin (10423) through
reverse control lever (10421), make sure the
spiral pin (10424) goes into the small hole in the

forward control lever (10422).

Forward Control Lever (10422)
1. Refer to Steps 1 through 3 in forward cable
replacement.
2. Reinstall in reverse order.
Figure 45
7
Figure 46