Throttle Cable (10439) Kawasaki, (10115) Briggs And Stratton - Better Outdoor Products Quick Series Operator's Manual

4. Remove the belt guard cover (refer to
Belt Guard Cover).
5. Remove cotter pin and release cable from
bracket Figure 52.
5
6. Disconnect the spring from the clutch
engagement arm Figure 53.
6
7. Cut any cable ties and remove cable assembly.
8. Install new cable in reverse order.
Note: After assembly, test control to ensure
clutch releases fully.
Throttle Cable (10439) Kawasaki, (10115)
Briggs and Stratton
1. Using a 5/16 socket, loosen the cable clamp and
remove cable end Figure 54.
Figure 52
Figure 53
BetterOutdoorProducts.com
31
2. Unscrew throttle control knob counter-clockwise.
3. Using a 3/8 wrench and 5/16 socket, remove the
throttle control bracket from dash panel Figure
55.
4. Cut any cable ties and remove cable. Install in
reverse order.
Note: When installing a throttle cable on a
Briggs and Stratton equipped machine, place
throttle lever in the choke position and pull cable
while tightening cable clamp.
1
Figure 54
Figure 55
3