Introduction / What's In The Box - Kanto SYD6 User Manual

Introduction
Thank you for choosing SYD6 Powered Speaker, designed by Kanto in Canada . SYD6 outputs
40 W RMS per channel into 4 Ohm speakers, for remarkably bold and clean sound . Excellent
sensitivity and frequency response provide deep thumping lows and clear, scintillating highs .
SYD6 is an amazingly flexible speaker system that can accept five input sources and connect
to a subwoofer for enhanced low frequency effects (LFE) . Additionally, it is equipped with the
latest Bluetooth technology and a USB port for charging USB devices . SYD6 operates on a multi-
voltage power source from 110 V to 240 V and can be used worldwide .
We recommend you read all instructions carefully before using the system and keep them for
future reference . Kanto cannot be liable for damage or injury caused by incorrect setup or use of
this product .
This powered speaker system was carefully tested and inspected during production, and before
packaging and shipping . After unpacking, please check for any damage . It is rare that a unit is
damaged during shipping, but if this happens contact your retailer immediately . You can also
call Kanto directly at 1-888-848-2643 or email support@kantoaudio .com .
What's In the Box?
SYD6 Active
Speaker
x3
User
Manuals
3
x8
Self-Adhesive
Rubber Feet
RCA AUX OPT1 OPT2
BASS TREBLE
BALANCE
SYD6
Remote
Power
Cord
Supporting your digital lifestyle
x2
'AAA'
Batteries
3 .5 mm cable
AUX (10')
™