Introduction / What's In The Box - Kanto YU5 User Manual

Introduction
Thank you for choosing YU5 Powered Speakers, designed by Kanto in Canada . YU5 outputs 40W
RMS per channel into 4 Ohm speakers, for remarkably bold and clean sound . Excellent sensitivity
and frequency response provide deep thumping lows and clear, scintillating highs . YU5 is an
amazingly flexible speaker system that can accept five input sources and connect to a subwoofer
for enhanced low frequency effects (LFE) . Additionally, it is equipped with the latest Bluetooth
technology and a USB port for charging USB devices . YU5 operates on a multi-voltage power
source from 110 V to 240 V and can be used worldwide .
We recommend you read all instructions carefully before using the system and keep them for
future reference . Kanto cannot be liable for damage or injury caused by incorrect setup or use of
this product .
This powered speaker system was carefully tested and inspected during production, and before
packaging and shipping . After unpacking, please check for any damage . It is rare that a unit is
damaged during shipping, but if this happens contact your retailer immediately . You can also
call Kanto directly at 1-888-848-2643 or email support@kantoaudio .com .
What's In the Box?
YU5 Active
Speaker
(Left Channel)
x8
Self-Adhesive
Rubber Feet
3
YU5 Passive
Speaker
(Right Speaker)
Power
Cord
RCA AUX OPT1 OPT2
BASS TREBLE
x2
BALANCE
YU5 'AAA'
Remote Batteries
Speaker
Wire (10')
Supporting your digital lifestyle
x3
User
Manuals
3 .5 mm cable
AUX (10')
™