What's In The Box; Remote Batteries - Kanto YU6MW User Manual

Introduction
Thank you for choosing YU6 Powered Speakers, designed by Kanto in Canada. YU6 outputs
200W Peak power into 6 Ohm speakers, for remarkably bold and clean sound. Excellent
sensitivity and frequency response provide deep thumping lows and clear, scintillating highs.
YU6 is an amazingly flexible speaker system that can accept five input sources and connect to
a subwoofer for enhanced low frequency response. Additionally, it is equipped with the latest
Bluetooth technology and a USB port for charging your devices. YU6 has a universal input
power supply and can be used worldwide from 110V AC to 240V AC.
We recommend you read all instructions carefully before using the system and keep them for
future reference. Kanto cannot be liable for damage or injury caused by incorrect setup or
use of this product.
This powered speaker system was carefully tested and inspected during production,
and before packaging and shipping. After unpacking, please check for any damage. It
is rare that a unit is damaged during shipping, but if this happens contact your retailer
immediately. You can also contact Kanto directly using one of the methods below.
Email: support@kantoliving.com
Toll Free: US & Canada: 1-888-848-2643 | UK: +44 800086999

What's In the Box?

YU6 Active
Speaker
(Left Channel)
x8
Self-Adhesive
Rubber Feet
Supporting your digital lifestyle
YU6 Passive
Speaker
(Right Channel)
Power
Cord
™
RCA AUX OPT1 OPT2
BASS TREBLE
BALANCE
x2
YU6
'AAA'
Remote
Batteries
Speaker
Wire
x3
User
Manuals
3.5 mm cable
AUX
3