Introduction / What's In The Box - Kanto YUMI POWERED SPEAKER User Manual

Introduction
Thank you for choosing the YUMI Powered Speaker System, designed by Kanto in Canada . YUMI
outputs 30 W RMS (60 W peak) per side into 6 Ohm speakers, for remarkably bold and clean
sound . Excellent sensitivity and frequency response specs provide deep thumping lows and
clear, scintillating highs . YUMI is a truly flexible speaker system that can accept five input sources
(including optical and Bluetooth®), drive a sub-woofer, charge USB devices and switch between
115 V and 230 V inputs .
We recommend you read all instructions carefully before using the system, and keep them for
future reference . Ensure that the Voltage Select switch is set to the correct input voltage for
your location. Kanto cannot be liable for damage or injury caused by incorrect setup or use of
this product .
This powered speaker system was carefully tested and inspected during production, and before
packaging and shipping . After unpacking, please check for any damage . It is rare that a unit is
damaged during shipping, but if this happens contact your retailer immediately . You can also
call Kanto directly at 1-888-848-2643 or email support@kantospeakers .com .
What's In the Box?
YUMI Active
Speaker
(Left Channel)
x8
Self-Adhesive
Rubber Feet
3
YUMI Passive
Speaker
(Right Channel)
Power
Cord
RESET
BASS TREBLE
x2
YUMI
'AAA'
YUMI
Remote Batteries
Speaker
Wire (10')
Supporting your digital lifestyle
x3
User
Manuals
RCA - 3 .5 mm
'Y' cable (10')
™