What's In The Box - Kanto YU User Manual

Introduction
Thank you for choosing YU Powered Speakers, designed by Kanto in Canada. YU outputs
140W peak power into 4 Ohm speakers, for remarkably bold and clean sound. Excellent
sensitivity and frequency response provide deep thumping lows and clear, scintillating
highs. YU is an amazingly flexible speaker system that can accept two input sources and
connect to a subwoofer for enhanced low frequency response. Additionally, it is equipped
with the high quality aptX™ Bluetooth
can be used worldwide from 100 Vac to 240 Vac.
We recommend you read all instructions carefully before using the system and keep them
for future reference. Kanto cannot be liable for damage or injury caused by incorrect
setup or use of this product.
This powered speaker system was carefully tested and inspected during production,
and before packaging and shipping. After unpacking, please check for any damage. It
is rare that a unit is damaged during shipping, but if this happens contact your retailer
immediately. You can also contact Kanto directly using one of the methods below.
Email: support@kantoliving.com
Toll Free: 1-888-848-2643

What's In the Box?

YU Active
Speaker
(Left Channel)
x3
User
Manuals
codec. YU has a universal input power supply and
®
YU Passive
Speaker
(Right Channel)
x8
Self-Adhesive
Rubber Feet
RCA
BASS TREBLE
BALANCE
YU
Remote
Power
Cord
x2
'AAA'
Batteries
Speaker
Wire
3