Kanto SP130 User Manual

Table of Contents

Download this manual

English

User Manual

SP130 Speaker Stand

30 lbs

(13.6 kg)

SPEAKER

STAND

CAUTION

The maximum loading weight is 30 lbs (13.6 kg). This speaker stand is intended

for use up to the maximum weights indicated. Use with products heavier than the

maximum weights indicated may result in instability causing possible injury.

Supporting your digital lifestyle

™

Table of Contents

Need help?

Do you have a question about the SP130 and is the answer not in the manual?

Page 1 English User Manual SP130 Speaker Stand 30 lbs (13.6 kg) SPEAKER STAND CAUTION The maximum loading weight is 30 lbs (13.6 kg). This speaker stand is intended for use up to the maximum weights indicated. Use with products heavier than the maximum weights indicated may result in instability causing possible injury.
Page 2 Introduction Thank you for choosing a Kanto AV Systems speaker stand. Each SP130 will hold a speaker weighing up to 30 lbs (13.6 kg) at 27.5” (70cm) off the ground to deliver ideal acoustically isolated sound. Each stand features four adjustable-height, knurled pin-point isolation feet for use in carpeted rooms, and optional floor plates to use on solid surfaces.
Page 3 If desired, use the rubber feet (F) on top of your Speaker Plate, as shown in Diagram D, to cushion your speakers and prevent slippage. The SP130 includes two slots in the speaker plate so that you can use screws to affix your speaker to the stand for added security.
Page 4 If equipment fails because of such defects and Kanto or an authorized dealer is notified within 24 months from the date of shipment with proof of original invoice. Kanto will, at its option, repair or replace the equipment, provided that the equipment has not been subjected to mechanical, electrical, or other abuse or modifications.