Table of Contents
Advertisement
What's in this Guide?
Calling someone by dialing their number
Dial the number directly and press
before and after dialing.
Alternatively, just press
to show the Call menu, if needed. Position the
Call and press
cursor at
to show the Call submenu:
Key in the "number" to call and press
While doing this you may need to switch to alphanumeric setting by means
of the abc/123 softkey. Activate S
D14330.09 TANDBERG E20 ADMINISTRATOR GUIDE (TE2.1) February 2010
Introduction
Deploying E20
. You can lift off the handset both
twice to start calling.
c
, if needed.
peciaL
HaRacteRS
Using E20
Using E20
Answering an incoming call
•
Lift the handset to answer the incoming call. Put the handset back in its
cradle to terminate the call.
•
Alternatively, press
to answer an incoming call. The call will then use
the built-in loudspeaker or your headset (if attached and selected).
•
To reject an incoming call press
Switching between handset,
loudspeaker and headset
•
To switch from handset to loudspeaker without terminating an ongoing
call, press the
button before putting the handset back in its cradle.
•
To switch from loudspeaker to handset, just lift the handset.
•
To switch between loudspeaker and headset, press the corresponding
button (
and
).
21
The Settings
Advanced settings
.
Hide quick links:
Advertisement
Table of Contents
