Making Calls By Dialing The Number; When Someone Is Calling; Terminating An Ongoing Call - TANDBERG C20 PLUS User Manual

What's in this guide? Getting started

Making calls by dialing the number

The term "number" has a wide definition here—you may use the
procedure outlined on this page to call people by their alphanumeric
address as well, for example:
"helen.karr@company.com"
Do as follows:
1. Key in the "number" to call. If needed, switch to alphanumeric or
numeric setting by means of the abc/123 softkey.
Press the softkey Special characters to access non-standard
2.
characters, if needed. See Special characters on page 8 for more on
this.
3. Press followed by or, press
Note that the system will search for matches as you write along.
You may alter the call rate setting before you place the call, if needed. Look for
s number two from the right (
oftkey
f key to display the Call rate setting menu. Select a new setting, if required.
unction
Press the key to produce
the menu, if needed.
call
Position the cursor at Call
and press to display the
submenu.
D1458203 USER GUIDE Profile Series, Codec C Series, Quick Set C20 / C20 Plus (TC3)—March 2010
Making calls
Making calls
twice to start calling.
). Press the corresponding
As soon as you start to key in, the
system will look for possible matches
in the Recent calls list, My contacts,
and the Phone book.
Using the phone book

When someone is calling

Respond to an incoming call by pressing the
to accept it, or press the
Press the
key on the
remote control
to answer an
incoming call.

Terminating an ongoing call

Terminating an ongoing call is similar to terminating calls on a cell phone—
just press the key on the remote control.
22
In-call features Advanced settings
key on the remote control
key to reject it.
Press the key on the
remote control to terminate
an ongoing call.
Press the
key on
the remote
control to reject
an incoming
call.