Raymarine ST70 Installation Manual page 12

4
ng
SeaTalk
There are restrictions on cable lengths, power location and the number of
components you may connect to a SeaTalk
ng
SeaTalk connectivity, refer to the SeaTalk
ng
SeaTalk Backbone Kit. See page 8 for information about additional SeaTalk
and accessories, including the SeaTalk
SeaTalk
In a typical SeaTalk system, the ST70 autopilot controller is connected to an existing
instrument on the SeaTalk system using a SeaTalk
Typical SeaTalk system with autopilot
ST70 controller
SeaTalk ng to SeaTalk
adaptor cable
Note:
You cannot callibrate an S1, S2 or S3 SmartPilot computer with an ST70 autopilot con-
troller, you must use a SmartPilot controller.
system structures and load limitations
ST6002 controller
SeaTalk cable
Depth
transducer transducer
ng
system. For complete information on
ng
Reference Manual supplied with the
ng
backbone kit.
ng
-to-SeaTalk adapter cable.
ST60+ speed
instrument
SeaTalk
cable
Speed
ng
cables
Wind
transducer
ST60+ wind
instrument
SeaTalk
cable
Course
computer
12V dc
D10398-1