Setting A Voice Command For Category - Kenwood KDC-HD545U Instruction Manual

Select lIPS NAME CHW I (Play)
6
Press the [VOL] knob.
Play the registered voice and return to step 3.
Select lIPS NAME DELlI (Delete)
6
Delete a voice tag
Press the [VOL] knob.
Exit Phone book name edit mode
Press the [
~
] button for at least 1 second.
e
. Audio sound is not output during voice tag registration.
Setting a Voice Command for
Category
Add a voice tag to the phone number category
(type) for voice calling.
1
Select Phone Number type edit mode
For how to select setup item, refer to <Bluetooth
Setup> (page 22)
Select "SETTINGS"
>
"VOICE TAG':
2
Enter Voice Tag edit mode
Press the [VOL] knob.
3
Enter Phone Number type edit mode
Turn the [VOL] knob to select "PN TYPE EDIT':
and then press the [VOL] knob.
4
Select the category (type) you wish to set
Turn the [VOL] knob and press it when the
desired category name is displayed.
"GENERAL"/ "HOME"/ "OFFICE"/ "MOBILE"/ "OTHER"
5
Select a mode
Turn the [VOL] knob.
Display Operation
"PN TYPE REG" Register avoice tag.
"PN TYPE CHK"* Playa voice tag.
"PN TYPE DEL"* Delete avoice tag.
"RETURN" Return to step 3.
" Displayed only when a name for which a voice tag has
been registered is selected.
" KDC-HD545U with KCA-BT200 (Optional Accessory) only
6
Register the category (type) by performing
steps 6 to 8 of select "PB NAME REG" (Register)
in <Adding a Voice Dialing Command> (page 26).
7
Exit Function Setting mode
Press the [
~
] button for at least 1 second.
~
~
• Set the voice tag for all the 5 categories. If the voice tag
is not registered for all the categories, the Phone book
may not be recalled by voice command.
English
I
27