Installing Your Cooker Hood - Baumatic BE600GL Instruction Manual

Installing your cooker hood

IMPORTANT: YOU WILL HAVE TO DECIDE BEFORE
INSTALLING YOUR COOKER HOOD WHETHER TO USE
IT IN
MODE.
UNDERSTAND THE DIFFERENCES BETWEEN THESE
TWO MODES.
o We recommend that at least two people install this hood.
o Please note that the styles of cooker hood shown in the
line drawings in the following pages are sometimes
different to the shape of the BE600GL, BE700GL and
BE900GL. However the installation method shown is
correct and MUST be followed.
IMPORTANT: YOUR COOKER HOOD SHOULD BE CONNECTED TO
YOUR MAINS SUPPLY AFTER THE REST OF THE INSTALLATION
PROCESS HAS BEEN COMPLETED.
2) Position the hood against the wall that you are intending to install it
on and mark the position of the support holes that are to be drilled (as
shown in the figure below).
EXTRACTION MODE
PLEASE TURN
1) Remove the metal grease filter.
OR RECIRCULATION
TO PAGE 26 NOW TO
20