Transport; Maintenance - Electrolux Automower G2 Operator's Manual

Safety Instructions

Transport

The original packaging should be used when
transporting the Automower™ over long distances.
To safely move from or within the working area:
1. Press the STOP button to stop the mower.
If the stop protection, (see page 39) used to
prevent theft, has been activated enter the first
number of the PIN code.
You select the four digit PIN code when you start
the mower for the first time, see page 24.
2. Switch off the main switch if the mower is to be
moved outside of the working area.
3. Carry the mower by the handle at the rear under
the mower. Carry the mower with the top against
your body.

Maintenance

!
WARNING
When the mower is turned upside down
the main switch must always be set to
the OFF position.
The main switch should be set to the
OFF position during all work on the
mower's underframe, such as cleaning
or replacing the blades.
The beeps (5 beeps in 5 seconds) warn
that the blade disc is about to start, if the
beeps are not audible the Automower™
is set to sound off.
• Inspect the Automower™ each week and replace
any damaged or worn parts.
Check especially that the blades and blade disc are
not damaged. Replace all blades and screws at the
same time if necessary so that the rotating parts are
balanced, see "Maintenance" on page 46.
8 electrolux automower
3012-388
3012-395
3012-409