Use; Charging A Discharged Battery; Starting The Automower - Electrolux Automower G2 Operator's Manual

Use

Charging a discharged battery

When the Automower™ is new or has been stored for
a long period the battery will not be charged and needs
to be charged before starting. Charging takes between
1 1/2 and 2 1/2 hours.
1. Place the Automower™ in the charging station.
Make sure the charging strips on the mower
makes good contact with the contact strips on the
charging station.
Good contact is made when both charging strips
lie against the centre of the contact strips.
2. Open the control panel cover.
3. Set the main switch to the ON position.
Information about the charging process is shown
on the display during the entire charging process.
!
WARNING
Read the safety instructions before you
start your Automower™.
!
WARNING
Keep your hands and feet away from the
rotating blades.
Never put your hands or feet close to or
under the body when the motor is
running.

Starting the Automower™

1. Press the STOP button to open the control panel
cover.
2. Set the main switch to the ON position.
If the time lock is activated: Enter the PIN code.
3. Close the cover.
The message "STARTING" is shown on the display. If
the Automower™ is set with the sound on you will also
hear 1 beep/second for 5 seconds when the blade disc
starts.
Use
3012-385
3012-299
1001-003
3012-274
3012-408
electrolux automower 43